Address: 15 Factory Street, California

SEAL TITE® 1210

Aramid & Graphite PTFE packing

SEAL TITE® 1210 is a tough and high-performance packing made from a combination of Aramid and Graphited PTFE yarn. The packing has resistant to all known chemicals and highly resistant to abrasion. A special grade of elastomeric rubber in the centre core absorbs the eccentric action worn shafts, spindles and bearings in the rotational application.

Advantages

  • Exceptionally high tensile & abrasion resistance.
  • High-temperature efficiency.
  • High-pressure resistancy.
  • Excellent compression and recovery due to elastomeric rubber in the centre core.
  • Good chemical resistancy.

Download

Category:

Application

Valves and pumps handling abrasive and aggressive slurries, pulp and
paper mills, sewage works, clay works. a Suitable for potable water,
fine chemical slurry, ammonium compound, paper pulp, pulp diluted
with water etc.

Technical Data

Pressure (bar) Shaft speed (m/s)
Static 250
Rotating 30 15
Reciprocating 100 5
Temperature(°C) -60 to +260 pH 1-13

Spool Ordering Information

Size mm 3 5 6 6.5 8 9.5 10 11 12 12.5 14 16 19 20 22 25.5
inch 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 1
Packaged
(±5%)
kg 1 1 1 1 1 1 1 1 1 1
2 2 2 2 2 2 2 2 2 2 2
5 5 5 5 5 5 5 5

*customized size and length available on request.

Reviews

There are no reviews yet.

Be the first to review “SEAL TITE® 1210”

Your email address will not be published. Required fields are marked *